7 1/4 Inch Metal Cutting Circular Saw Reviews

Ryobi vii 1/iv Circular Saw PBLCS300 Review

If we had to choose a unmarried cordless detail for carpentry and construction, nosotros would be hard-pressed to pick confronting a vii ¼" round saw for basic cutting tasks.  We use round saws on everything from sizing 2×iv rough framing to doing plunge cuts on outside wall sheathing. And then when nosotros recently got the risk to test out the newest Ryobi 7 1/four Circular Saw PBLCS300, we took it.  We tested information technology out cut some replacement ii×iv jack studs and framing for a porch rehab before installing windows and capsule.  This gave us a chance to test out pattern, features, and overall performance.

Ryobi PBLCS300 Features & Specifications

• Brushless motor delivers up to forty% faster cutting
• 0-56° bevel capacity for cut versatility
• Adjustable depth guard for cutting up to ii-7/16 in. depth of cut at 0° and 1-3/4 in. at 45°
• Die-cast upper guard for increased durability
• Vacuum grit adapter is compatible with i-seven/8 in. and 1-one/4 in. hoses
• On-board LED worklight to illuminate workspace for articulate cut line visibility

Ryobi PBLCS300 Brushless Motor

The unmarried biggest improvement included in Ryobi'southward PBLCS300 7 ¼" circular saw is the improver of a brushless motor.  By incorporating a brushless motor, Ryobi has achieved major advances in overall power, tool longevity, and bombardment life.  A brushless motor eliminates internal castor-based friction by locating the permanent magnets on the outside of the copper coils.  It causes motor rotation based solely on the magnetic interaction of the coils and magnets by energizing the coils.  This means no brushes to wear out and replace which causes the tool to concluding longer.  It also means there is less wasted free energy from the friction of the brushes so more ability is delivered past the motor and the bombardment life is longer.  That'southward a lot of words to say that the brushless motor in the Ryobi 7-i/4″ 1+ Circular Saw PBLCS300 is a large deal.

Ability & Performance

We found that the Ryobi 7-one/4″ One+ HP Circular Saw PBLCS300 cut fast, was powerful, and maintained speed/RPMs under load. Nosotros were pleased with this saw'south overall cutting performance, especially with a 4Ah +HP or greater battery pack.  In that location were a couple of situations of note.  First, we noted that the motor ran smoother with a thin-kerf blade vs a standard kerf blade. This is due to less overall material removal.  Ryobi includes a thin-kerf bract with the PBLCS300 circular saw.

We also found that the saw performed noticeably better with a 4Ah +HP battery vs. a 2 Ah battery, even on initial cuts with a fully charged 2Ah battery.  This is due to the smart HP+ bit electronics integrated into the PBLCS300 round saw.  The tool recognizes when a +HP battery is loaded and allows the motor to run at a higher RPM (4300 vs. 3700 with the P508).  The One+ tools also have chip integration (P508) merely the + HP lineup allows for additional battery power to be directed to the motor.  We could hear some motor strain with 2Ah battery and the blade seemed to accept a minimal corporeality of slowing.  For the bulk of the test, we used the 4Ah +HP battery to cut 2x4s and ½ plywood with zero problems.

Run-time

Ryobi didn't publish specific claims on overall runtime or number of cuts in a standard material.  At Tool Box Buzz, we feel that well-nigh of the major tool brands that are offer a full-size circular saw are using good lithium-ion battery packs along with brushless motors.  And the anecdotal testing of this saw was bang-up; we were able to get a typical half-day of intermittent use out of a single 4Ah HP+ battery.  Merely put, this saw should run long enough for the average worker to complete his or her work in a standard workday, with a battery change. Possessing two battery packs, and the fast charger ensures that the saw sees no reanimation.

Cutting Chapters

The Ryobi 7-i/4″ One+ Circular Saw PBLCS300 bevels to 56 degrees and provides a 2-7/sixteen″ depth of cutting at 90° and 1-13/16" at 45° (see table below). Adjusting the cutting depth and bevel angle aligning is seamless with the tool-gratis adaptable design for both functions. The overall adjustment action is smooth. The bevel lever is large and piece of cake to firmly grip.  The depth aligning is well placed to allow the operator to use the bombardment casing as a leverage bespeak for one-handed depth adjustments. The depth adjustment has a depth guess with a modest white marking to make certain the bract adjustment is well matched to the material thickness.  It is a fleck obscured behind the handle simply otherwise very adequate.

• Bevel Capacity – 56°
• Depth of Cut at 45° – 1 thirteen/16" in
• Depth of Cutting at 90° – 2 seven/sixteen

Ease of Use

Every bit far as ergonomics go, the Ryobi PBLCS300 has a well-designed and very comfortable grip.  The chief grip is comfortable and at that place is a push button-in, ambidextrous rubber button that is well within thumb's reach and easily pressed. The front handle is offset approx. 20 degrees to relieve wrist strain during prolonged or repetitive cutting. This saw measures 13.5" long and is 7.2" loftier and 11" wide. The bare PBLCS300 round saw weighs in at a mere 6.6 lbs.  The weight went upwardly to 8.2 lbs with a 4Ah HP+ bombardment loaded.

There is an LED low-cal, located depression on the saw near the baseplate, that lights upwards the cut line decently when required.  The LED is slightly obscured by the bevel adjustment assembly, although the lite is semi-angled on the right side to try and offset this design feature.  The LED light seemed average in brightness.  Nigh of the cutting washed on the jobsite during the test was done either exterior on horses or in a lighted area this didn't have a major negative bear upon.  Some of our favorite circular saws in the past had no LED then this is more of a bonus feature rather than an essential one.

It's of import to note that the Ryobi PBLCS300 is a correct-bladed saw.  The saw blade is mounted on the right side of the motor from the operator's perspective.  This has a direct bear on on line-of-sight as it offers a much ameliorate viewing bending for right-handed users.  This is 1 of the ii major improvements over the previous Ryobi P508 brushless 18V 7 ¼" circular saw.  The other beingness the already discussed +HP applied science and increased power.  And for me, makes the extra $10 a no-brainer as a right-handed user.

Circular Saw Line-Of-Sight

The sightline blower design is a groovy feature.  The design channels the air movement from a fan inside the motor housing to 2 spots along the cutline.  First, air is directed to the front end side of the cutline via the front molded baffle (picture 1 below).  In that location is too a 2d blower vent located on the lesser of the motor housing directed towards the blade/textile contact point (moving picture 2 below).  The dual blower does a fine job of clearing the dust from the sightline.

In add-on to the sightline blower feature, one major addition to the PBLCS300 is the grit port inclusion.  This is an improvement over the PBLCS's predecessor, the P508.  The molded plastic dust port connection is fastened onto the back of the metallic blade guard with a single screw. The user tin can easily remove information technology if they don't want information technology.  It did not obscure the line-of-sight in any mode or increase the tools overall length (and have an increased take a chance of getting broken) so we left it mounted during use.

The Ryobi PBLCS300's biggest drawback is it's stamped steel shoe (vs cast aluminum or magnesium).  It was more than malleable than the cast shoes and may be more prone to bending.  For the homeowner or DIYer, Ryobi's target audition, this particular will likely be a non-factor.  The shoe was quite square (about i/32" out of alignment from front and rear corresponding blade teeth to shoe edge) upon initial tool inspection.  The saw cut accurately in all tasks we used it for.

PBLCS300 Safety Features

The Ryobi PBLCS300 circular saw has a depression baby-sit design with a clear polycarbonate bract guard (standard feature).  Information technology provides skilful visibility to hands spot material hang-ups.  The blade baby-sit also provided a nix hang-up day of operations at a variety of bevels and angles.  Lastly, it is very easy to pull dorsum the blade guard for bract changes.

At that place is an ambidextrous safety switch on the tool's handle only higher up the trigger.  The ii-pace performance is an important safety feature.  Of note, the power to release the rubber switch and continue cut made this characteristic more than jobsite friendly. Lastly, the electric brakes stops the saw bract in less than 2 seconds.  We make it a point of safe on every chore site to grip the tool until positive blade stoppage so nosotros appreciated the time saved and added condom of the electric brake.

Kit Includes:

• 7-1/4″ (184mm) Circular Saw (PBLCS300)
• 7-1/4″ (184mm) Blade, thin kerf, 24 Tooth
• Blade irresolute wrench

Ryobi PBLCS300 Cost

The Ryobi 7 1/4 round saw PBLCS300 just comes for auction as a bare tool (PBLCS300, $129 MSRP). A 2-pack of 18-Volt I+ 4.0 Ah Batteries (P145, $79 MSRP) is an easy add together on option. If you want the best battery performance check out the 9AH +HP battery (model P194, $159).  Check it out online here:

Ryobi 7 1/4" One+ HP circular saw (Model PBLCS300)

$129

Last Thoughts

The Ryobi seven 1/4 round saw PBLCS300 has a great remainder of power and functioning, especially at its comparatively-depression price point.  The brushless motor delivers a noticeable increase in power and operation, particularly when paired with a Ryobi +HP bombardment.  It is a comfortable and very capable saw overall.  There aren't many features nosotros hope to see improved in future iterations of Ryobi circular saws.  Ryobi could upgrade to a cast aluminum or magnesium shoe.  They could likewise look at the LED calorie-free blueprint to address the miter angle aligning assembly to be less obstructive.  The PLLCS300 is a very well designed seven 1/4″ circular saw for the DIYer or homeowner equally our minimal list of recommendations shows.

kimtrandre.blogspot.com

Source: https://www.toolboxbuzz.com/cordless-tools/circular-saw/ryobi-7-1-4%E2%80%B3-one-hp-circular-saw-pblcs300/

Share this post